催化学报

催化学报 ›› 2008, Vol. 29 ›› Issue (5): 431-435.

• 研究论文 • 上一篇    下一篇

浆态床合成甲醇CuO/ZnO/Al2O3催化剂的表面性质

李忠,郑华艳,谢克昌   

  1. 太原理工大学煤科学与技术教育部和山西省重点实验室, 山西太原 030024
  • 收稿日期:2008-05-25 出版日期:2008-05-25 发布日期:2012-05-02

Surface Properties of CuO/ZnO/Al2O3 Catalyst for Methanol Synthesis in Slurry Reactor

LI Zhong*, ZHENG Huayan, XIE Kechang   

  1. Key Laboratory of Coal Science and Technology of Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
  • Received:2008-05-25 Online:2008-05-25 Published:2012-05-02

PDF

803

被引次数

110

摘要： 采用并流共沉淀法制备了不同Cu/Zn摩尔比的CuO/ZnO/Al2O3催化剂,考察了其浆态床CO加氢合成甲醇的催化性能. 通过N2吸附-脱附、X射线衍射、程序升温还原及X射线光电子能谱等方法对催化剂表面性质进行了表征. 结果表明,催化剂具有体相和表面高分散两种不同还原性质的CuO, 表面CuO的含量及其与ZnO的相互作用使催化剂活性增大. 当催化剂中Cu/Zn ≤1时,随着铜含量的增加,表面高分散的CuO量增加, CuO和ZnO之间相互作用增强,催化剂的活性也随之增大; 当催化剂Cu/Zn>1时,增加的铜量主要体现为体相CuO含量的增加,且ZnO结晶度提高, CuO和ZnO之间的相互作用减弱,催化剂的活性随铜含量增大而减小.

关键词: 铜基催化剂, 浆态床, 甲醇合成, 一氧化碳, 加氢

Abstract: The CuO/ZnO/Al2O3 slurry catalyst was prepared by parallel flow co-precipitation at different Cu/Zn molar ratios and characterized by N2 adsorption-desorption,X-raydiffraction, H2 temperature-programmed reduction, andX-rayphotoelectron spectroscopy. When Cu/Zn≤1, the quantity of highly dispersed copper oxide on the catalyst surface was increased with increasing copper content, which favored the interaction of CuO and ZnO and increased catalyst activity for methanol synthesis. When Cu/Zn>1, the quantity of bulk copper was increased with increasing copper content, the crystallinity of ZnO was increased, and the interaction of CuO and ZnO was weakened, leading to the decrease in the activity of the CuO/ZnO/Al2O3 catalyst.

Key words: copper-based catalyst, slurry reactor, methanol synthesis, carbon monoxide, hydrogenation