催化学报 ›› 2010, Vol. 31 ›› Issue (4): 461-465.

• 研究论文 • 上一篇    下一篇

以类水滑石为前驱体的含Cu催化剂催化糠醛加氢反应

郑良科, 徐成华, 梁文标, 刘建英, 刘俊, 敦星杰, 郭燕, 杨迎春   

  1. 成都信息工程学院资源环境学院, 四川成都 610225
  • 收稿日期:2010-04-25 出版日期:2010-04-25 发布日期:2013-10-08

Furfural Hydrogenation over Cu-Containing Catalysts Obtained from Hydro-talcite-Type Precursors

ZHENG Liangke, XU Chenghua*, LIANG Wenbiao, LIU Jianying, LIU Jun, DUN Xingjie, GUO Yan, YANG Yingchun   

  1. College of Resources and Environment, Chengdu University of Information Technology, Chengdu 610225, Sichuan, China
  • Received:2010-04-25 Online:2010-04-25 Published:2013-10-08

摘要: 采用共沉淀法制备了不同 Cu 含量的铜镁铝类水滑石 (Cux-MgAl), 再在 500 oC 焙烧制得 Cux-MgAlOy 催化剂. 分别考察了在 220 和 300 oC 还原时, Cu 含量对 Cux-MgAlOy 催化糠醛加氢反应性能的影响. 用 X 射线衍射、H2 程序升温还原、紫外-可见漫反射光谱和 X 射线光电子能谱等技术对催化剂进行了表征. 结果表明, 当 Cu 含量为 11.2% 时, Cu-MgAlOy 催化剂活性和稳定性较高, 糠醛加氢生成糠醇及糠醇进一步加氢脱水的催化活性中心主要是 Cu0, 而催化剂中的 CuO, MgO 和 MgAl2O4 金属氧化物具有催化糠醛与溶剂乙醇反应生成 2-二乙氧甲基呋喃的作用.

关键词: 铜, 类水滑石, 糠醛, 催化加氢, 糠醇, 2-甲基呋喃

Abstract: Cu-containing catalysts from hydrotalcite-type precursors exhibited an excellent catalytic property in furfural hydrogenation. The Cu0 species from the spinel phase was the catalytic active site.

Key words: copper, hydrotalcite, furfural, catalytic hydrogenation, furfuryl alcohol, 2-methyl furan